Flowsys

Condensate Pot

The main purpose of condensate pot is to hold the condensate & arrest foreign ingredients. The function of the condensate pots is to condensate steam into a liquid to protect the instruments like transmitters from heat & to keep the liquid levels unchanged. The piping from the restricting device to the condensate pots are full of steam & from the condensate pot to the measuring instrument is full of condensate.

The condensate is drained from the bottom ports with valve connection. The condensate water transmits the pressure to the transmitter, so that the transmitter itself is not in contact with steam. Condensate chambers are used as a barrier between the main line & the secondary instruments in the measurement of steam or other vapours which condense to a liquid state insuring compatibility with the secondary instruments. Installation can be done either in vertical or in horizontal lines between the primary component & the secondary instrument. It acts as a barrier to the line fluid allowing direct sensing of the flow conditions. Condensate pots should be mounted at the same level minimizing possible error that could arise due to unequal head of fluid in the connecting pressure lines. Usually the level in the chambers should be equal the total volume of condensate in the transmitter & the sensing lines.

Features

  • Sizes available up to 6″.
  • Fabricated from Seamless pipes.
  • Available in Carbon Steel, SS304, SS316, SS316L, Monel 400, Inconel, Super Duplex based
    on the process requirements & applications.
  • Wide range of operating pressure rating. Operating temperature up to 400 deg. Centigrade.
  • Available with customized socket weld coupling (ANSI B 16.11) configurations.
  • Variety of end connections include NPT, ISO/BSP Threads, welded adaptors.
  • Multiple coupling selections to suit technical requirements.
  • TIG welded as per ASME SEC IX by qualified welding personnel.
  • Cleaned from inside to measure correct liquid volume.
  • Offered with Shot blasted, painted or mirror like surface finish. Available with NACE MR-01-75 compliance.
  • Offered with complete relevant testing requirements.